Topic: Plasma-adhesive bonding technique, plasma-adhesive technology. Better adhesion capability and bonding strength. Age-resistant bonding of PA12 (polyamide).

Age-resistant bonding of PA12 (polyamide)

SAT: 1 week, 40°C, 100% humidity
2K-PU: Two-component polyurethane
2K-EP: Two-component epoxy resin

Bonding PA12 using polyurethane and epoxy adhesives. This graph shows a definite increase in tensile shear strength of the plastics treated with plasma. Even after a one-week saturated atmosphere test, the bond still exhibits high strength values.

Partners & Testimonials


Reliable bonds in filter manufacturing

Bonding of filter end caps presents a special challenge in the filter industry. Very good adhesion is required here, even under extreme operating conditions, such as continuous contact with oil at temperatures around 150°C.

Read reference story

back to main topic Bonding

Plasmatreat UK Ltd.
D5 Culham Science Centre,
Abingdon, Oxfordshire
OX14 3DB
Great Britain

Phone: +44 1865 408324

Contact: Mr. Graham Porcas

When the foil fails to stick - Plasma as troubleshooter in touch foil bonding
Electronics: Kaizen and plasma herald the future
Here Comes the Sun - Plasma treatment of a CFRP solar race car
JEC Asia
The Composites Business Platform

15. – 17. November 2016
Booth: G23, Level 4
Suntec Convention & Exhibition Center, Singapore

Inprint 2016 Logo
Industrial Print Show

15. – 17. November 2016
Hall: Lev. South 0, Booth: A17
Milano, Italy